 |
+ Diagrams |
| Diagram 1 - This diagram shows an example of the B23 plateTensile Test. All plates are tested with this method by applying force to the threaded part of the fastener whilst the plate is retained by rings with various sized centre holes corresponding with the red circles. Scroll down for Intensity of Stress Charts. |
 |
| Diagram 2 - The red circles are the diameters that correspond to the charts. Maximum psi reading taken at 0.047 elongation of plate through the retaining ring centre hole. |
 |
| Diagram 3 |
 |
| Diagram 4 |
 |
| Diagram 5 |
 |
|
Rotaloc Int'l, LLC would like to advise customers that these measurements are to be considered only for reference. Strength can change upon different materials and applications. Please consult the Rotaloc Technical Labs for further advice. Technical Support: support@rotaloc.com |
